USE OF IODINE AS PROPELLANT FOR HALL EFFECT THRUSTERS (PTRP) – EXPRO PLUS
23, May 2016

ESA Open Invitation To Tender AO8640
Open Date: 18/05/2016
Closing Date: 29/06/2016 13:00:00

Status: ISSUED
Reference Nr.: 16.123.01
Prog. Ref.: TRP
Budget Ref.: E/0901-01 – TRP
Special Prov.: BE+DK+FR+DE+IT+NL+ES+SE+CH+GB+IE+AT+NO+FI+PT+GR+LU+CZ+RO+PL+EE+HU
Tender Type: C
Price Range: 200-500 KEURO
Products: Launchers / Avionics / On-Board Computers / *See Software
Technology Domains: Onboard Data Systems / Payload Data Processing / System Technologies for Payload Data Processing
Establishment: ESTEC
Directorate: Directorate of Technical & Quality Manag
Department: Mechanical Engineering Department
Division: Propulsion & Aerothermodynamics Division
Contract Officer: Strzelecki, Patryk Michal
Industrial Policy Measure: C1 – Activities in open competition limited to the non-Larg…
Last Update Date: 18/05/2016
Update Reason: Tender issue

Iodine as a propellant is considered a valid alternative to xenon for electric propulsion application, in particular on Hall effect thrusters. Several advantages when using iodine as opposed to xenon can be enumerated. Iodine and xenon atomic mass and first ionization energy are very close and thruster performances, in terms of thrust density, thrust efficiency and specific impulse, have proved to be almost the same. Iodine is solid at ambient temperature and pressure, with a density about four times the density of xenon stored at 200 bar of pressure and ambient temperature. Hence, the same the thrust mission, iodine requires for storage a smaller, not pressurized tank with respect to xenon. Gaseous iodine at low pressure (up to about 10 kPa) can be obtained by heating the solid propellant at relatively low temperature (up to about 100 °C). Iodine cost is currently 1/15 the cost of xenon and its availability can be considered unlimited for the proposed applications. The iodine condensability potentially reduces pumping requirements in vacuum facilities for on ground testing, yielding a cut in the development costs of the thrusters. However, many issues remain to be assessed before iodine can be widely adopted in space missions. Being a halogen, iodine is chemically active and is not compatible with several materials. Its tendency to condensate on surfaces implies a careful design of the propellant feeding line and thruster injection system, including the cathode. Moreover, spacecraft/plume interaction with the risks of iodine surface deposition and chemical aggression represents a critical issue to be thoroughly investigated. The following tasks are included:1) Design and manufacture a prototype of iodine feeding system (tank, heaters, valves, throttling and metering system), suitable for an existing, xenon fed, 100 W class Hall effect thruster, including the cathode.2) Experimental assessment of the feeding system performances in terms of mass flow rate production and controllability.3) Review and modify the design of the Hall effect thruster and the cathode, to be compatible for iodine operation (materials, injection systems, etc.)4) Manufacture the modified thruster.5) Integration of the thruster with the feeding system.6) Test of the iodine fed thruster, aimed at a first experimental assessment of the operation and the performance of the propulsion system Procurement Policy: C(1) = Activity restricted to non-prime contractors (incl. SMEs). For additional information please go to EMITS news “Industrial Policy measures for non-primes, SMEs and RD entities in ESA programmes”.

If you wish to access the documents related to the Invitation to Tender, you have to log in to the ESA Portal.