INTEGRATED Q/V/W-BAND PASSIVE RF HARDWARE FOR GROUND SEGMENT NETWORK EQUIPMENT (ARTES AT 6A.077) (ON DELEGATION REQUEST)
15, April 2022

ESA Open Invitation to Tender: 1-10697
Open Date: 08/04/2022 18:52 CEST
Closing Date: 24/06/2022 13:00 CEST

The objective of this activity is to design, manufacture and test integrated Q/V/W-band passive RF hardware for ground segment gateways. Targeted Improvements:- Reduction of number of piece parts by at least a factor of 2;- Reduction of losses in the order of 0.5 to 2dB due to less RF interfaces;- Reduction of effort of assembly, integration and testing.Description: Very High Throughput Satellite systems are shifting towards higher frequencies for the feeder link due to the increasing traffic demand. Q/V and W-band are able to provide a large spectrum which allows to free Ka-band for user connectivity. RF components of the gateway feed chain are mainly based on waveguide technology. At high frequency the component dimensions become very small and the manufacturing and tuning is very complex. The impact of flanges and tuning elements in the ohmic losses is significantly higher than lower frequencies, resulting in degraded Noise Figure (NF) and Equivalent Isotropic Radiated Power (EIRP) at system level. Conventional manufacturing techniques such as milling, require to divide the RF block in multiple mechanical parts which are later on connected using flanges and screws. This results in bulky assemblies and large waveguide connections with the consequent impact on ohmic losses. In addition, tuning means are required in order to compensate the manufacturing deviations. The manufacturing in a single block, reducing the need to waveguide interfacing and shortening the RF interconnections, will allow a higher degree of integration and could consequently contribute to improvements of the RF performance. Advanced manufacturing techniques such as 3D printing, micro-inject moulding, screen printing, metal binder jetting or lithography-based processes have been already used to build proof-of-concept RF hardware at high frequencies. However the achieved TRL is low and additional work has to be performed to evaluate its suitability for the aimed demonstrators. These new concepts could also provide an additional degree of freedom in the design in terms of RF and structural features. Furthermore, the reduction in the number of parts using these methods may lead to a simplification of the overall antenna feed chain. This activity aims to develop and experimentally validate three breadboards of fully integrated passive feed chains (including Diplexers, OMTs, filters) at Q, V and W-band respectively. The end-to-end manufacturing route for each demonstrator shall be defined and evaluated in terms of mechanical tolerance, yield, surface properties, etc. Critical functions of the RF equipment at the different frequencies shall be designed, manufactured and experimentally validated. Procurement Policy: C(1) = Activity restricted to non-prime contractors (incl. SMEs). For additional information please go to EMITS news “Industrial Policy measures for non-primes, SMEs and RD entities in ESA programmes”. Footnote: On Delegation Request activities will only be initiated on the explicit request of at least one National Delegation.

Directorate: Directorate Telecom Integrated Applica
Estabilishment: ESTEC
ECOS Required: No
Classified: No
Price Range: > 500 KEURO
Authorised Contact Person: Audrey Ferreol
Initiating Service: TIA-TTG
IP Measure: C1
Prog. Reference: E/0534-01G – CC-AT 4.0.1
Tender Type: Open Competition
Open To Tenderers From: AT+BE+CA+CH+CZ+DE+DK+EL+ES+FI+FR+GB+HU+IE+IT+LU+NL+NO+PL+PT+RO+SE
Technology Keywords: 6-E-II-RF Equipment
Products Keywords: 4-B-2-a-Transmitter and Receiver assemblies, Frequency converters,…

If you wish to access the documents related to the Invitation to Tender, you have to log in to the ESA Portal.