TECHNIQUE FOR LOCATING PASSIVE INTER-MODULATION SOURCES (ARTES AT 5B.188)
15, November 2019

ESA Open Invitation to Tender AO9747
Open Date: 13/11/2019
Closing Date: 29/01/2020 13:00:00

Status: ISSUED
Reference Nr.: 19.1TT.28
Prog. Ref.: CC for Advanced Tech
Budget Ref.: E/0505-01C – CC for Advanced Tech
Special Prov.: BE+DK+FR+DE+IT+NL+ES+SE+CH+GB+IE+AT+NO+FI+PT+GR+LU+CZ+RO+CA+HU
Tender Type: C
Price Range: > 500 KEURO
Products: Satellites & Probes / RF / Microwave Communication (Platform and Payloads) / Antennas / Omnidirectional, Helix, Horn, Parabolic, Phased Arrays / Platform vs Payload
Technology Domains: Electromagnetic Technologies and Techniques / Antennas / Measurement, Characterisation and Calibration Techniques for Radiative Payloads and Antennas
Establishment: ECSAT
Directorate: Directorate Telecom & Integrated Applica
Department: Telecom Technologies,Product&Systems Dep
Division: Technologies and Products Division
Contract Officer: Beardsell, Andrea
Industrial Policy Measure: N/A – Not apply
Last Update Date: 13/11/2019
Update Reason: Tender issue

The objective of this activity is to develop fast testing techniques for on-board antennas to locate radiated and conducted sourcesof Passive Inter-Modulation (PIM) products. Validation of the PIM location technique shall be performed on representative hardware.Targeted Improvements: Enabling fast identification of the locations of PIM sources in assembled antennas during satellite assembly, integration and test (AIT). Potential time saving of several days during AIT in case of PIM test failure.Description: Passive Inter-Modulation (PIM) interferences can significantly affect the overall performance of telecommunication satellite payloads. This is particularly true for payloads dedicated to broadcasting services, where common antennas are used for transmit and receive applications. Use ofdissimilar metals, loose metal-to-metal contacts and poor workmanship are the most likely sources of PIMin payload assemblies. For this reason, stringent design, manufacturing and assembly processes are applied in order to avoid or mitigate PIM occurrence.Part of the payload assembly, integration and test (AIT) is often verification of the workmanship by a PIM test at ambient temperature, or in a space representative thermal vacuum environment. However, in the case of PIM anomalies, there is nofast testtechnique available today to identify thelocation of the PIM source(s). Thus, identifying the workmanship issues can be time-consuming and will delay the AIT of the satellite.The aim of this activity is to develop a fast testing technique for on-boardantennas to locate radiated and conducted sources of Passive Inter-Modulation(PIM) products within quasi real-time (e.g. a few hours). Validation of the location technique shall be performed on representative hardware.

If you wish to access the documents related to the Invitation to Tender, you have to log in to the ESA Portal.